Case
Home / Case / Coal washing plant wastewater treatment

Coal washing plant wastewater treatment

Coal washing plant wastewater treatment


The coal being mined in coal mining usually contains some impurities, and the separation efficiency of the coal from the impurities can be improved by adding flotation agents. The fine coal is flotation out and the tail coal settles. The fine coal in the tailings is then recovered by settling, filtration or centrifugation. Polyacrylamide is applied in the settling process, thus promoting solid-liquid separation. It is then sent to the thickener, and the clear water is recovered and recycled by the overflow of the thickener. The pulverized fine coal is recovered by filtration and centrifugation. Polyacrylamide is added again during the filtration and centrifugation process to improve the separation efficiency. For the needs of users in this area we have produced a special flocculant for coal washing, which has a better effect on different coal mines and also greatly reduces the dosage of dosing.


II. Technical parameters

Rice Appearance: White granules

Rice solid content: ≥88%

Xing molecular weight: 6-20 million

Density: 10-40(Mole%)


III. Product features

Rapid formation of large flocs, large and compact alum blooms, low sludge volume and fast flocculation and sedimentation.

Rapid dissolution of rice, no insoluble material (fish eyes); the product in powder form dissolves in about 60 minutes.

Economical and practical - small dosage, good effect, high dewatering rate; low operating cost, low dosage can produce effective effect and high dewatering performance, very economical.

m filtering and dewatering properties improve the dewatering of sludge.

Automatic feeding of meters is possible; easy handling.

Hot Products

WeChat
WeChat